ICT IGCSE Paper 2 June 2018 22 Part 1 Document Production



hello welcome back to my youtube channel my name is josue ahmed today we're going to be looking at paper to document production from the information and communication technology course course code is 0 for 117 I'm going to be looking at the May June 2018 paper at version 22 so paper 2 is a 2 hour and fell to me long practical paper so let's scroll down so you're going to perform some clerical tasks for two hour training so the first task is the evidence document we're now going to open up diem file so use for the evidence so it's going to be j2 to 8 evidence dot RTF so to find this file you need to go to your source folder double-click the file to open up so I've got my evidence document already opened up the next thing we need to do is make sure your name Center number and candidate number appears on every page of this document so we can include this information into the header so if I go back to my evidence document to insert the header you click on insert header and always go up the option which gives you 3 columns ok so we'll go for this option here so I'm going to include my name the next thing we need to include is the center number so I'll use 5 6 7 8 and then the candidate number which I'll use I use 1 2 3 4 so for the center number 5 6 7 8 for the candidate number I'll use 1 2 3 4 then we can close the header so once you've included information to header this information will now appear on every single page so the next step is to save this as a word process document into your work area as j22 eight evidence followed by your candidate number so for example I will include 1 2 3 4 at the end of the file name so let me just copy this so make sure when you are saving you do select word document you can check click check where you save him the evidence documents oh yes I want to save into source files and I'm going to include my candidate number so 1 2 3 4 so again double-check your saving as a Word document not as a RTF so let's first save that's ok ok so that's that part done you will need to play screenshots and answers to questions into this evidence document as we complete the question paper so now let's move on to the main tasks so tasks to document you are going to edit a fact sheet the company uses a corporate house tile for all their documents paragraph styles should be created and of unapplied as instructed so using a suitable software package open a file j2 to 8 a parent or RTF so again you can go to your source folder you can find a location file double-click to open so I've got a file already open so let's have a look so we've got 2 pages of information so far right the page is set up to a4 landscape orientation of 2 centimeter margins do not make any changes to the settings so we leave the settings as they are we're going to save this document into your work area area with a file named fact I can make sure it's saved in a format of the software you use in so when you save as a Word document file so I'm just highlight this file save as save it as a Word document file change your file name as a fact sheet again double check to say see if you saved me into the source files so yes I am it's a Word document then we can press save ok so you can see the file name on the top here flag sheet ok so evidence one place in your evidence document a screenshot to show the file has been saved make sure there's evidence of the file type so what we can do we can go to a source folder we can see here this is the name of the files or Microsoft Word document you will see the date based file because I did do the date based before the word document so obviously when you're doing it for the first time you might not see in a database or the extract file so let me take a print screen of this making sure you can see the file type so max of Word document so let me press print screen then I'll go to my Evans document and I'll paste in the print screen as I mentioned and in other videos if you want to use the snipping tool also that's up to you just whatever you feel more comfortable using I'm just going to include the folder name increase the size of the print screen so you can show where the files been saved and also you can see the file flag sheet and it's saved as a Microsoft Word document so let me press save okay that's that part done now we need to play some information into the header so your name is sent a number and candidate number left aligned so again when we inserted a header click on insert header always select the option which gives you three columns so on the left hand side it's going to be your name then he sent a number and any candidate number I'm sent a number five six seven eight and then a candidate number one two three four automated page numbers right aligned so we can click on this option now and go to page number and we want to insert a page number in a current position so when we go to the next page you'll see this should change to two yep you can see that's changed it to what my name sent a number and candidate numbers has stayed the same which is what we want we can delete this option here we don't need to insert anything into the middle and then we can close the header footer now we need to import or not import insert content into the foot so what we want to import or to insert is the automated file name or the file path right aligned so to insert the footer again the same option select the option which gives you three columns click on the right hand side and what we want to place in the footer on the right hand side is automated file name and a file path ok so what we can do we can make sure you click to write part the footer go to quick parts field and you want to select a file name and also you want to add the file path so we can delete these options here on the center and left alignment so we got two file name and a file path it doesn't matter if it's too long it's still aligned to the right hand side so that should be fine let me check the question papers anything else so make sure that all the alignments match the page margin so what that means is basically you can see this has been aligned for the page margins so the head and footer is not outside here so let's check the header as well sort of header falls within our margins after page as well as the page number no over Texas included in a head and footer so that's done and header and footers are displayed on all pages so what we can do before we move on is we can close a head and footer we can go to file print and we can check the print preview so you can see it my name Center number candidate number page number and then we've got their file name with the file path right aligned so if you go to the second page you'll see the same information pairs on every page so let's save the changes okay let's go down to the next question okay so the question of three we're going to create and store the following Styles basing each on the default paragraph style okay so in total we've got to be creating one two three four five six different dials so to create the styles what we need to do first of all if you go to your word document if you click on this little tab here or icon it'll open up this window and then we can create a new styles by clicking on this option here to create a new style so the first style we're going to create is a ta dash title style make sure you enter this information exactly as it appears on a question paper including a capital letters and including any dashes copy so let's change your name okay we're going to be using a sans serif font so if you're not sure the difference between a sans serif and serif fonts you can go to my website you click on paper too and you can open up the document production overview so honest overview in a moment we'll see the difference between us and serve and serif fonts so whilst this is loading up let's see what else we need to do for this font so the font size will be 30 the alignment will be Center aligned enhancements will include bold and italic the line spacing will be single okay so it's almost loaded ups taking a while right here we go this is the overview so we're going to be looking at two types of font styles so font styles can be placed into two categories stance serif or serif so sans-serif fonts have straight edges as you can see here this is an example Arial of a sans serif font the edges are straight whereas serif fonts have little ticks at the edges of each letter so Times New Roman is an example of a 7 font and you can see at the end of each letter is a slight little tick so when they do ask you to go for San serif font go for sunset and go for aerial if they ask you to go for serif font go for Times New Roman as default and font values so remember when you are creating and textiles you need to click on a little icon here at the bottom of change styles then you need to click on the option to create a new style so you need to make sure you include style name and the formatting can be applied here so here we've got the alignment and then here with a line spacing what you can also do is and edit existing styles by click right clicking on a style and selecting modify as well ok so let me go through some of these things here so here the first thing we're going to be looking at its alignment so obviously if we select this options it's going to left align the text this option will centre align the text and this option here will write a line of text if you don't if you don't see a justification what you can do is you can click on format paragraph and a select justifies are justified we'll make sure the text is straight on both sides line spacing so single line spacing will mean there's no spaces in between the lines if we selected this option here 1.5 line spacing you'll see this some space between aligns and a double line spacing the spacing between Alliance has increased and if you want to include spacing after you can click on format to paragraph and then you can include a spacing after or the spacing before as well sometimes you may be to indent on particular textile okay so if you do need to find this PowerPoint or this overview if you go to my website if you click on paper to link and then you can click on document production and it'll open up and the overview presentation right so let's go back to my question so we've got the title we're going to go for Sun server font so by default let's go of Arial okay the font size will be 30 points so we can change up to 30 I'll just type it in and you can see the example down here so Arial 30 the alignment will be Center the enhancements will be bold and metallic so we can click on bold and italic single line spacing and it's no space before or no space after so that's the first aisle completed and check the preview if you're happy you can press ok you can see this stylus now appears here and also appears here so now let's create the next style so we're going to create the subtitle style so ta – subtitle so again we can click on the + to create a new style include the name okay the first thing you'll notice the formatting from the previous style is still on so maybe case we have to turn these on or turn I will leave them on so we'll have a look let's see what we need to do so the font style will be Sun surf so again we can go with aerial same as the previous one so we can keep that the font size will be 18 so we can reduce 30 to 80 so you can see the example on the previous reduce the file size matter file size the font size the alignment will be on the left hand side any enhancements will be underlined so let's change the alignment to left hand side so you can see that text would be aligned to the left there is no bald there's no italic or when you to make sure the text is underlined single line spacing and again is no spacing before or after so again make sure the single line spacing option has been selected press ok so it doesn't really matter this point of the text here is changing so we can keep on going so again we want to create a new style we've completed the second one now now we're going to be creating a ta dash subhead style so again we can click on a new style icon right in the name so ta dash subhead exactly as it appears on a question paper again it's going to be San serif so we can stick with Arial and the font size again will be the same so we can stick with Arial and we can keep the font size the same this time the alignment will be centered so we can change the alignment to Center Yap is changed in a preview and yeah enhancement will be bold and italic so we need to take off the underline and we need to include bold and italic again single line spacing and this time the spacing after will be nine points so what we can do we can click on format paragraph and a space after line would be nine points so what this means is if I press ok there will be an automatic space after the line which would be nine points so you can see here as well the informations been added so nine points after we can press ok so now that's the third style created so let's mark this one off now we're going to be creating the TA body style so this will be applied for the main text so again we can click on your style type your name this time we're going to be using a serif font so by default we can go with Times New Roman okay and you can see that slight little ticks at the end of each letter the size of the font will be twelve and the alignment will be justified so let's change the size to 12 and if you click here this will make sure that formatting is just five so the alignment is justified that means straight on both sides if you don't see the justified and option here you can always click on format to paragraph and select justified here as well okay no enhancements so what we need to do is make sure we take off the bold and the italic single line spacing and this time we're going to have six points after so basically after each paragraph we're going to have an automatic spacing so if you go to format paragraph and instead of mine we're going to change this to six press ok and now that's a fourth style that we've created so let's mark this one off now we're going to create the TA bullet style so two more styles to create so again we can click on the close to create a new style let's type the name in so we're going to be going with son self again so we can choose Arial as the default okay the font size will be 14 so as you can see the previous made a text a little bit bigger we're going to include bullets indented to centimeters from the left so what we can do is if we go to format sometimes you have to look at the different options if you go to format a paragraph and we want to indent let me double check I think it's 2 centimeters yep 2 centimeters from the left so if I type in 2 and press ok and you can see we've indented two centimeters from the left and we also need to make sure they're enhancement or the text or the bullet points will be italic so we can select italic and a bullet points has a tick shaped bullet so what we can do is click on format again look at the options I think it's going to be a number one then if we go to bullets and we select the tick option so you can see the bullet has been aligned okay you can see the alignments is slightly changed so if we go back to format paragraph it's gone to two point six three centimeters I'm going to change this back to two centimeters so it's moved back slightly so just double check yeah it's two centimeters single line spacing and it's no space before or no space after so you can see there's a slight space after so we need to remove that so if we go to paragraph let's get rid of the space that we included for the previous style so the most basic after and now we can press ok and a final style we're going to create is a style which will be used at the table so it's going to be ta – table style so let me copy this okay let's include the name so we're going for seven fonts so again we can choose Times New Roman the size with which well so we can select Times New Roman select well as a font size left alignment so we can select left alignment okay enhancements non-single and spacing so what we need to do obviously you can see we've still left on the tick from the previous style so what we need to do is go to format paragraph we need to remove anything we left on from previous style so the indentation we don't have any spacing and we also need to remove the tick as well so go to numbering well it's select none so as you can see it's on the left hand side its Renea enhancements no there isn't so we can remove the enhancements so before I finished let me double check so we should have a serif font so that should be Times New Roman the font size should be 12 so Times New Roman font size is 12 the alignment is left yep's on the left-hand side single line spacing and it should be no spacing after or no spacing before so I'm happy right so I've just finished creating my six styles okay now let's have a look at the evidence so if evidence to to take a screenshot to show the style settings have been a defined for the ta subhead paragraph style so it's going to be for this one here place this into your evidence document okay so we need to basically show evidence we've applied or we've created this style so if you go back to work if you right-click on subhead we can click on modify we need to basically print screen this if I go to format paragraph we can also include this in a print screen as well to show that we've got nine point spacing after so if a person print screen that's okay so for a second print screen we're basically showing and the style has been created for the subhead so again remove the parts which we don't need and then we can increase the size of the print after print screen so we can see a subhead style let me double check so it should be sans-serif 18 and Center aligned so Arial Center aligned font size is 18 the enhancements should be bold in italics yep so you can see the enhancement is bold and italic and then we got a nine-point space after the font style okay so let me save the changes okay so I've completed the evidence let me just highlight this off so now question for display these custom style names as a list in a style manager or organizer provide a screenshot evidence that these stars have been created named and saved so what we need to do next is we basically need to show this window so to show this window we can click here again on his icon and we basically to take a print screen to show that we've created each of us tiles identified it in a question paper so let me print screen this so for evidence free just paste and again crop up the part but you don't need and again always increase the size so it's fairly obvious what you are trying to show so let me just move this title to next page okay so this is evidence I've created all the Styles shown in the question paper so let's press save evidence free is now done okay so question 5 at the start of a document enter title get ahead with an apprenticeship so when you are entering the title make sure you also include the capital letters so to get to start the document let's click before produce let's press enter let's go up again and we basically need to insert Isis obviously you would have to write it in in the exam paper I'm just going to copy and paste has to be exactly like it is shown here in a question paper apply the TA title style to this text so let's highlight the text now we want to apply the TA title I prefer having this window open it's just easier to select the styles so let me double check the house style so the font style be Arial the text should be center-aligned the font size should be 30 enhancements of bold and italic and there's no spacing after so as you can see I'm happy of this we can keep going forward so you should be always checking back to the house style to make sure the font style appears as it should ok so we're done question of 5 now enter your name immediately after the subtitle produced by so let me enter my own name so produce by and what we need to do is apply the TA subtitle style to this text okay so I'm going to highlight the text and I'm going to select ta subtitle okay so I get an immutable check it should be left aligned sunset on the line just let me double check I want to see if I left a bold on no I'm happy that okay so we can keep going now it says apply the TA body style to the rest of the document so you need to highlight all of the text and click on ta body and then double check to see if all of the text has been am stars have been applied sometimes it may be case you have to click on clear all and then reapply the TA body style in case pop or one paragraph for example the style looks slightly different so that is the case clear and reapply the body style if one paragraph is not or one part graphs look slightly different to the others right so that's that part done so for question eight change your page layout so the subheading the structure so let me first find this particular subheading so structure and all following text is displayed in two equally spaced columns of two centimeter spacing between a columns so basically what we need to do is to format from this point onwards into two columns the mistake people make is to highlight all of the text including the titles you need to make sure you check to see where the columns are starting from so the columns are starting from the subheading structure and all the following text so let me highlight structure and the rest of the text I can get rid of this enough actually let's leave that for now to make columns if you go to layout columns always select the option which gives you more columns you want to select two columns and it's in between is going to be 2 centimeters so we can change up to 2 cm so make sure you got to see em okay so you can see after this Pat X we've formatted the rest of the text to be displayed in two columns with a two centimeter spacing between the columns okay so far so good okay so question 9 we want to apply the ta Paulo style to the list of items from a intermediate apprenticeship so let me first of all find this information so what we can do we can go to home find and you can type in the text that you're looking to find so it's going to be from this point to level 6 & 7 so it's going to be basically we need to apply the bullet point styles to this text here so 1 2 3 4 so again I'm going to select highlight the text and click on a bullet style which we want to apply okay and let me double check the house style to make sure it's right so you should have a son serif font font size should be 14 so yep you got Arial is 14 the enhancement is italic and we should have the tick shaped bullet which we do it seems like we're two centimeters in from a left-hand side okay and we've got no spacing after so that looks right to me so I'm happy that I'm just going to save the changes and let's keep going okay so question I'm done question 10 we have to identified five subheadings in the document and apply the TA subhead style to each one so we should have five subheadings so structure is one so see a subhead that's the first one this looks like a second one engineering apprenticeship this looks like the next one and flowing beauty skills training shapes and I think that's a fourth one and then we just see yeah and higher apprenticeships okay so we should have five subheadings or one two three four five yet I'm happy right okay so question 11 using the data in the file j2 – eight adverts dot CSV create a vertical bar chart showed a number of advertisements only for higher apprenticeships for the years 2013 to 2016 okay so the first thing I'm going to do is open up the file so the file which we need to use is this one here so if you go to your source data it's this one here so you can double click it so I've got a file open already so this is file here and the key parts to this question is we need to create a vertical bar chart okay and it's got to show the number of advertisements only for the high apprenticeships for the years 2013 to 2016 so let me just highlight the key parts so we're going to create a vertical bar chart it showed a number of advertisements for only higher apprenticeships for the years 2013 to 2016 so let me have a look now so 2013 follow a to 2016 now it's quite easy to make a mistake when making a bar chart what we can do is just highlight the years as well and you see what would happen so if we go to here this is vertical this is obviously horizontal we've got two bars okay so it's included a years so that would be a mistake what you should do is highlight high apprenticeships and highlight the numbers or we can just highlight numbers doesn't really matter let me just highlight the whole row I'm going to insert and select the vertical bar chart option and then what we can do obviously one two three four with first of these years here so we can right click on a graph and we can select the data so the horizontal values so if you click on edit and then you can highlight it the years will refer to each of the bars and then you can press ok so 2013 should be below 1500 which it is and on 2016 is just below 3500 which it is okay so that's a part done label a chart a title growth in degree level apprenticeships okay so let me copy that please pay special attention if David's capital letters or you know particular Spelling's it has to be exactly as it appears on the question paper so I'm looking I can copy and paste obviously you guys would have to type in this information because you won't be given the exam paper electronically so I'll let me type that in right it's that's that part done format the value access scale to display sure let me first of all highlight that this is done so we have to format the axes I always forget this step but if you apply your common sense so if you want to format the axes let's just right click on it click on it right-click and let's select the option of formatters format z-axis then you've got lots of different options here so what do we need to do a maximum value of 3600 so we can change this option to 3600 okay and increments of 600 you'll notice we going up in 500 so we got 100 going all the way to 600 so the units are the majors we've got to change from 500 to 600 so we can change that here as well okay some happy that and which is how lights have done this and then we need to label a category axis with a title here so that's going to be this horizontal axis here so what we can do if you click on the graph and let's get rid of this now we can either go to a design quick layouts and select the option here to give us an axes or you can click on the plus icon here we can include AXI titles as well we don't want this one here so I can get rid of this one here for the vertical axis this one here we need to label it as year and again if there's a capital y make sure you include a capital y paste that in do not display a value access title or legend so we're basically we don't want to show a title for the values and we don't want to show a legend so if you're not sure what the legend is the legend would be this option here we don't show that obviously we don't want to show this axis here so we got the title we selected the right values I was from high apprenticeships from 2013 to 2016 ok so that's the graph done this is a part where people will make mistakes on the graphs especially formatting axes so if this is your weakness make sure you are revising this particular part so we're going to insert a chart after paragraph ending seen in a following graph so I'm going to be in a moment copy and paste in this but let me first of all find where we're going to be placed in this graph so again we can use if you go to home find we type in that information let's get rid of this now so we want to basically paste a graph after this line so insert a chart after the paragraph ending seen in the following graph make sure the chart fits within a column and all labels are fully displayed so now to insert we can simply copy and we can paste this graph okay let me just controls that again when you are pasting actually what you can do you can right-click and you can pay so keep the source formatting make sure the graph fits within a columns of sleeve the graph is like this it's not fitting with Benna columns so I mean first controls said so it doesn't matter the graph has gone through the next page it's okay for now let me just save the changes okay let me highlight this part them question 16 so we want to import this picture as a PNG is a format for picture so we're going to import the j2 to a side picture and place it below the subtitle produced by so let's go to here we want to place it below here so this is where we need to click okay so to insert a picture you need to click on insert picture and then double check to see yep its J 2 to 8 sign so we can select this picture here okay so now let's apply the formatting which would be the next question so as highlight this so format the image so it is resized okay it's going to be 4 centimeters wide the aspect ratio maintained so we can go to top up here and changes to 4 cm right so it's best to do it up here so we will maintain the aspect ratio what you don't want to be doing is squashing it like this so let me press ctrl Z to undo okay it is aligned to left margin and the top of the paragraph starting apprenticeship is a real job which is a sentence here and it takes wraps around the image so what we need to do is we need to click on a picture we can have it set select this icon here so we want to wrap the text tight around the first paragraph so if I just move this down slightly so we need to make sure this the juice bike comes on the Left again you can also a double click on a picture and go to format and you can also select wrap text and tight again so the picture has to be aligned to the top of the paragraph on a left hand side okay so you can notice you'll see now the graph where's my graph gone has moved on even more okay so it's fine so let me just press save so save this document in the same filename which we did just now I so at this point here you're not asked to print because what we're going to be doing or what them previously is in databases we have to make an extract okay so if I go down to question 23 we have to produce an extract from all the data so in databases if I go to my source folder so I did do the databases first if I open up this file here and this is the extract so the extract was basically I had to create a query what I had to do is basically select these particular fields okay so vacancy ID vacancy and wage in this particular order we had to make sure the Wake vacancy encloses includes engineer okay so I had to basically if I go to a search criteria you can see add to post are around engineer the level is intermediate so how to write intermediate for the level well because we did not want to display the level we did not take this option here to display that particular field but we still can search for that field and a wage is 150 or more so for the wage we've done greater than or equal to 150 so basically I creates the query selected the fields so you can watch this part in a database video if you want okay and then we have to save the extract so to save the extract what you have to do is basically click on a right click extract export and then we extracted it as an RTF file so if I go down back to the word question so export this the extract created in step 23 save the exported file into your work area and then place this into evidence document so for evidence 9 if I go to me I – documentary 4 I've done the database before so you can see the evidence is already complete and for the database an evidence 9 you can see the extract has been saved as an RTF file so placing the Avenues document a screenshot to show the exported files saved into your work area make sure it's evidence of the file type ok so if I keep going so we're now back to the document production ok so if you were doing this example but obviously you do your word section you save it then you complete the database section and then you come back to the word section so I'm going to finish off the word section now since I've made you extract so let me first of all open up the extract this is the extract here let's read a question so import the extract you saved in step 24 into your fact sheet documents as a table after the paragraph which ends vacancies available are so what we want to do is go to word let me find out where I'm meant to import this so if we go to find again so we're going to insert a table here ok do you extract so so insert is simply we have to basically copy and paste ok so let me have like before copy paste I'm just going to adjust the column sizes because I need to make sure if it's going to fit within my columns whoops you go onto text to wrap if you make mistakes press ctrl-z right so I've change the column sizes let me cut copy and paste this now right click copy let's go to here and when you paste in select this second option here and let me see the requirements of this table so the table fits within a column so what we can do is we can actually increase the size of the table the episode fits within a column the extract does not contain a title so I've got no extracting just the fields all fields and their labels are fully visible yep no text is wrapped so this is a common mistake people will do this some students will do this they won't adjust the column sizes and as you can see the text is come on to the second line so to avoid this just basically resize the columns and showing the text is not wrapping okay let's go back the TA table style is applied to the extract so we can highlight the table if you click on this option again ta table has been applied again now we've got some text wrap so what we're gonna have to do is just slightly change the size of columns yep that's been done there's a six point space after the table so after the table what we can do we can just click here let me double click and change the size to six after the table so six and it should be no spacing as well so removes no that's fine six is fine okay okay so now question 26 is complete let me highlight this there's no mention on borders so I'm going to leave this table as it is so there's no mention on borders we can leave it as it is you can check the house style to make sure the text has been a properly formatted so let's just go back up just a house style so the textile should be serviced and the format of size it should be twelve and left aligned so let me double check yeah so the size of the font is twelve the alignment is left and the font we abuse is seven okay so we've come almost to the end of this question okay so question 27 spell check and proofread a document so what you can do is we can go to review and we can check the spelling yes you have to check document so this one spelling mistake so vacancy ID we can keep it as it is because it's the name of the field or if you want to check the spelling just you can go through and you can check to see if there's any red lines under your particular words so make sure tables charts and lists are not split over two columns or two pages so I'm just going to zoom out a little bit so we can have a look at this document before we print so this table is fine it fits onto one column it's not going over two columns and it's graph is also fine it stays within one column okay it's no off with widows or orphans there's no black pages so I'm just double checking yeah I'm happy this house tiles specification has me followed so I've been checking has been gone along a space in between all items is consistent so again we can save a document and now we're ready to print documents so we can press save as a fact sheet so remember before you print check if the header and the footer details are showing on the page you go to file and print preview and you can check all of the pages so again make sure the spacing is consistent the font styles have been applied properly okay the tables or the charts fits within the columns so as you can see here there's a slight problem the graph there let me just double check my graph you okay so that should be okay now yeah that would be fine it's okay to be honest right so now we've come to the end of a document production part so we can print this document so 220 you just send it to a printer here okay so make sure when you receive your document you double check for any mistakes if there sa any mistakes put it to one side and then you can always reprint the document okay so before we finish document production let's look at the final question in this part so many jobs are now being replaced by IT systems so jobs are basically being lost due to ICT systems evaluate any other words the effect of IT on potential employment for these apprentices so basically what we need to say has there been any positive impact fix of ICT or has been a negative impact we can look at both sides of the argument so in evidence 11 type your evaluation in your own words into the evidence document user no more than 100 words so we're basically evaluating many jobs have been replaced by IT systems evaluate the effects of IT on potential employment for these apprentices so I've copied information from the mark scheme so let's have a look this before we do look at the answer there's only four marks available so you only need to write for different things down so the types of things you can write for this answer is you could say fewer jobs available as to being taken over by robots especially in the manufacturing industry especially the more labor-intensive work so imagine cars are being built robots and I'll been used to build these cars to replace human beings however jobs have been created so it has been increased in jobs in writing software programs increase in jobs relating to the maintenance of robots and IT equipment increase in jobs related to web designers advertising increase in computer engineers project managers system analysis Network managers for example so jobs have been lost because now we have robots no particular jobs however new jobs have also been created so there are new options Unity's for these apprentices so we've come to the end of document production thank you for your time please subscribe to channel please share this content with your friends again thank you for your time

7 Comments

  1. XxM7md YT said:

    Hey, Can we switch brains just for tomorrow ?

    May 22, 2019
    Reply
  2. eva frimlová said:

    This is amazing thank you so much!! 🙂

    May 22, 2019
    Reply
  3. Um Qahtan said:

    Thank you so much for taking the time to do all this, means a lot!

    May 22, 2019
    Reply
  4. yahya zaidi said:

    Very helpful!

    May 22, 2019
    Reply
  5. nooramina khan said:

    you did not fix the graph in it's correct position what do we do about that? because my graph is also facing the same issue.

    May 22, 2019
    Reply
  6. Hamza Akhtar said:

    can u make a video about all the important things(key points) about igcse for paper 2 and paper 3??

    May 22, 2019
    Reply
  7. NightShadeGT said:

    Which paper is more difficult, 21 June 18 or 22 June 18?

    May 22, 2019
    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *