How to change your transmission oil and mechatronics seals on a ZF 6 speed – BMW- Detailed

20 Comments

  1. Thomas Whittaker said:

    Hello,

    by any chance you know a part number or a link to a website to get an input speed sensor for a BMW 750I 2009. plan to do some DIY on the transmission but i recently got an error about " Transmission Fault Code: 400626 – Turbine speed sensor short circuit to ground or
    open circuit"

    May 27, 2019
    Reply
  2. dlf qka said:

    고생많으심니다… 작업예정인데 큰도움됨니다. 오일넣는거 내가더힘들어요

    May 27, 2019
    Reply
  3. notmanynamesleft said:

    Wow BMW didn’t make it easy to service the gearbox!

    May 27, 2019
    Reply
  4. Dee Jay said:

    Thank you so very kindly for the video but there are no links in the info area.

    May 27, 2019
    Reply
  5. Dan Ked said:

    What if I just want to change the oil and filter?

    May 27, 2019
    Reply
  6. 11jeepwrangler said:

    Great video my question is do you know why my car won’t start now and the dash gearbox keeps blinking after doing this

    May 27, 2019
    Reply
  7. Federico Puca said:

    hi, I did not understand exactly how to proceed with the cleaning of the valve unit. Is it essential or only recommended? thank you and greetings !

    May 27, 2019
    Reply
  8. Tripple-N MB said:

    Thanks for the video, I have some question and hope you can feedback as I do DYI my own car. When you remove the electrical connector and removed the valve body assembly. Do we need to removed the battery connection first? . After completing all job , Do we expect error code /error alrm in the car that requires reset?

    May 27, 2019
    Reply
  9. G Meredith said:

    Very nicely done and thank you for sharing. I've done this job myself a few times and I use an electric battery operated pump which makes the job a little simpler. Watching you do it with the bottles only, I give you much respect!

    May 27, 2019
    Reply
  10. production sah said:

    any idea what would cause a blinking dash with power cut on an E66? thanks

    May 27, 2019
    Reply
  11. Gaz Roberts said:

    Excellent video thankyou

    May 27, 2019
    Reply
  12. Dennis Auto Service said:

    Why are you talking to the nut..

    May 27, 2019
    Reply
  13. Aman A said:

    33:10 Did you top up the oil with it in reverse? Shouldn't it be in drive?

    May 27, 2019
    Reply
  14. Aston1936 said:

    Excellent video!  Can you share where you got your mechatronics seals AND where you got the paper you were holding that appears to be a ZF procedure manual or something.

    May 27, 2019
    Reply
  15. DonaldRumsfailed said:

    Fantastic work. Very clearly shown. Thank you!

    May 27, 2019
    Reply
  16. Jérôme jéjé said:

    Please can you tell me sherry dis you vêt INPA for tour BMW ? Than you and excellent vidéo 🙂

    May 27, 2019
    Reply
  17. PoppaSquat789 ! said:

    Is this the same procedure for an N54 535?

    May 27, 2019
    Reply
  18. kokovq said:

    Why are are you reusing the filter ??? Don’t be so cheap buy yourself new ZF filter 🤦🏻‍♂️

    May 27, 2019
    Reply
  19. Clutch Viggo said:

    Great information. Thank you!

    May 27, 2019
    Reply
  20. Robert Thrailkill said:

    Very good description of the steps to remove and replace. Thanks

    May 27, 2019
    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *